Rapidion Water Private Limited

ROMICON® cartridges should be selected for filtration of

liquids based on the separation range needed. They provide

stable productivity, ease of cleaning and reliable operation.

KSS ROMICON® cartridges are crossflow-type filters, in

which the feed solution is pumped across the cartridge to

minimize solids cake buildup on the membrane. Crossflow

filters provide efficient filtration at low operating pressure,

allowing long process runs while reducing cleaning time,

cleaning frequency, and labor costs.

Additional Information:

• Item Code: HFMEMBRANE
• Production Capacity: 1000LPH
• Delivery Time: 1WEEK
• Packaging Details: wOODEN BOX

1.     Introduction

 

This general instructions and technical information are for the use of MOLSEP® hollow fiber module, Type: FS10-FC-FUS 0181 , which is specially designed to produce bacteria and pyrogen free water in pharmaceutical, Semi-conductor, food, bio and other processing.

NOTE:

 

The information is based on our latest state of knowledge and is intended to provide only general notes on MOLSEP® Modules. At any time we reserve the right to make modifications due to new developments. Any existing property rights must be observed. MOLSEP® Modules are devices which are intended for use by specially trained personnel only. We do not accept liability for any injury or damaged to persons, equipment or products caused directly or indirectly by the use of the modules offered herein. Any warranty for module delivered in a defective state is limited to replacement of said module only.

MOPSEP® is registered Trademark of DAICEN MEMBRANE-SYSTEMS LTD.

The superior features of the module,FS10-FC-FUS 0181, are introduced as follows.

•   High Water Productivity

Low membrane resistance of the hollow fiber and the large membrane area, 7.8 m2 in the module, succeed in producing enough water quantity even under lower pressure operation.

•   Heat Durable

In order to apply hot water sterilization, the hollow fiber in the module is made of heat resistant plastic, Polyethersulfone, and all other module components are also selected from highly heat

resistant materials.

The module was tested and passed severe thermal stress trials in which rapid heating and cooling between 2°C and 98°C was repeated.

•   Excellent Chemical Resistance

Because the hollow fiber is made of an excellent plastic, Polyethersulfone, it is resistant to many chemicals in a wide pH range of 1-13. Furthermore the efficiency of the membrane can be easily

recovered by using a strong detergent.

•   Distinguished and Sharp Separation Characteristics

The hollow fiber membrane molecular weight cut-off is 30,000 Dalton. It can reject not only bacteria and fine particles but also completely reject endotoxins in feed water. Therefore pyrogen

free water can be confidently produced by MOPSEP® hollow fiber modules.

Additional Information:

• Delivery Time: Immediately

Rapidion: Your Trusted Distributor of Koch Reverse Osmosis Membranes

As a proud distributor of Koch, Rapidion is dedicated to providing a comprehensive range of high-quality membrane solutions for various industries and applications. Koch manufactures the largest array of membrane products in the industry, including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) membranes. These are available in hollow fiber, spiral, and tubular configurations, utilizing a variety of advanced membrane chemistries.

Koch's commitment to economies of scale ensures that you receive compact cartridge designs with maximum membrane area, leading to improved flux rates, enhanced rejection capabilities, and greater longevity.

For decades, companies have relied on Koch products to meet all of their filtration needs, and Rapidion is here to support you with this trusted technology.

Benefits and Features

• Effective purification of water
• Removal of chemical contaminants
• Recovery of acid streams
• Reduction of wastewater volumes through increased water reuse
• Lower operating costs

Membrane Feed Water Sources

• Surface water
• Brackish water
• Sea water
• Groundwater

Typical Applications

• Reverse osmosis
• Potable water
• Pure water
• Process water
• Food and beverage
• Chemical processing
• Metal finishing
• Power solutions
• Semiconductor
• Oil and gas
• Dairy processing
• Pharmaceuticals
• Pulp & paper
• Mining water

Choose Rapidion as your distributor for Koch’s premium reverse osmosis membranes, and experience the reliability and performance that has made Koch a leader in the filtration industry.

Additional Information:

• Item Code: KOCH
• Production Capacity: 5000LPH
• Delivery Time: Immediately
• Packaging Details: As prefer by customer , or we refer to wooden box package

Rapidion: Your Trusted Distributor of Koch Reverse Osmosis Membranes

As a proud distributor of Koch, Rapidion is dedicated to providing a comprehensive range of high-quality membrane solutions for various industries and applications. Koch manufactures the largest array of membrane products in the industry, including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) membranes. These are available in hollow fiber, spiral, and tubular configurations, utilizing a variety of advanced membrane chemistries.

Koch's commitment to economies of scale ensures that you receive compact cartridge designs with maximum membrane area, leading to improved flux rates, enhanced rejection capabilities, and greater longevity.

For decades, companies have relied on Koch products to meet all of their filtration needs, and Rapidion is here to support you with this trusted technology.

Benefits and Features

• Effective purification of water
• Removal of chemical contaminants
• Recovery of acid streams
• Reduction of wastewater volumes through increased water reuse
• Lower operating costs

Membrane Feed Water Sources

• Surface water
• Brackish water
• Sea water
• Groundwater

Typical Applications

• Reverse osmosis
• Potable water
• Pure water
• Process water
• Food and beverage
• Chemical processing
• Metal finishing
• Power solutions
• Semiconductor
• Oil and gas
• Dairy processing
• Pharmaceuticals
• Pulp & paper
• Mining water

Choose Rapidion as your distributor for Koch’s premium reverse osmosis membranes, and experience the reliability and performance that has made Koch a leader in the filtration industry.

Additional Information:

• Production Capacity: Premium Only
• Delivery Time: 8 to 10 week
• Packaging Details: As prefer by customer , or we refer to wooden box package

1.     Introduction

 

This general instructions and technical information are for the use of MOLSEP® hollow fiber module, Type: FS10 FC FUST 653, which is specially designed to produce bacteria and pyrogen free water in pharmaceutical, Semi-conductor, food, bio and other processing.

NOTE:

 

The information is based on our latest state of knowledge and is intended to provide only general notes on MOLSEP® Modules. At any time we reserve the right to make modifications due to new developments. Any existing property rights must be observed. MOLSEP® Modules are devices which are intended for use by specially trained personnel only. We do not accept liability for any injury or damaged to persons, equipment or products caused directly or indirectly by the use of the modules offered herein. Any warranty for module delivered in a defective state is limited to replacement of said module only.

MOPSEP® is registered Trademark of DAICEN MEMBRANE-SYSTEMS LTD.

The superior features of the module, FS10 FC FUST 653, are introduced as follows.

•   High Water Productivity

Low membrane resistance of the hollow fiber and the large membrane area, 7.8 m2 in the module, succeed in producing enough water quantity even under lower pressure operation.

•   Heat Durable

In order to apply hot water sterilization, the hollow fiber in the module is made of heat resistant plastic, Polyethersulfone, and all other module components are also selected from highly heat

resistant materials.

The module was tested and passed severe thermal stress trials in which rapid heating and cooling between 2°C and 98°C was repeated.

•   Excellent Chemical Resistance

Because the hollow fiber is made of an excellent plastic, Polyethersulfone, it is resistant to many chemicals in a wide pH range of 1-13. Furthermore the efficiency of the membrane can be easily

recovered by using a strong detergent.

•   Distinguished and Sharp Separation Characteristics

The hollow fiber membrane molecular weight cut-off is 30,000 Dalton. It can reject not only bacteria and fine particles but also completely reject endotoxins in feed water. Therefore pyrogen

free water can be confidently produced by MOPSEP® hollow fiber modules.

Rapidion: Your Trusted Distributor of Koch Reverse Osmosis Membranes

As a proud distributor of Koch, Rapidion is dedicated to providing a comprehensive range of high-quality membrane solutions for various industries and applications. Koch manufactures the largest array of membrane products in the industry, including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) membranes. These are available in hollow fiber, spiral, and tubular configurations, utilizing a variety of advanced membrane chemistries.

Koch's commitment to economies of scale ensures that you receive compact cartridge designs with maximum membrane area, leading to improved flux rates, enhanced rejection capabilities, and greater longevity.

For decades, companies have relied on Koch products to meet all of their filtration needs, and Rapidion is here to support you with this trusted technology.

Benefits and Features

• Effective purification of water
• Removal of chemical contaminants
• Recovery of acid streams
• Reduction of wastewater volumes through increased water reuse
• Lower operating costs

Membrane Feed Water Sources

• Surface water
• Brackish water
• Sea water
• Groundwater

Typical Applications

• Reverse osmosis
• Potable water
• Pure water
• Process water
• Food and beverage
• Chemical processing
• Metal finishing
• Power solutions
• Semiconductor
• Oil and gas
• Dairy processing
• Pharmaceuticals
• Pulp & paper
• Mining water

Choose Rapidion as your distributor for Koch’s premium reverse osmosis membranes, and experience the reliability and performance that has made Koch a leader in the filtration industry.

Additional Information:

• Item Code: UFMEMBRANE
• Production Capacity: 5000 LPH
• Delivery Time: 1WEEK
• Packaging Details: As prefer by customer , or we refer to wooden box package

1.     Introduction

 

This general instructions and technical information are for the use of MOLSEP® hollow fiber module, Type: FS10-FS-FUS0353, which is specially designed to produce bacteria and pyrogen free water in pharmaceutical, Semi-conductor, food, bio and other processing.

NOTE:

 

The information is based on our latest state of knowledge and is intended to provide only general notes on MOLSEP® Modules. At any time we reserve the right to make modifications due to new developments. Any existing property rights must be observed. MOLSEP® Modules are devices which are intended for use by specially trained personnel only. We do not accept liability for any injury or damaged to persons, equipment or products caused directly or indirectly by the use of the modules offered herein. Any warranty for module delivered in a defective state is limited to replacement of said module only.

MOPSEP® is registered Trademark of DAICEN MEMBRANE-SYSTEMS LTD.

The superior features of the module, FS10-FS-FUS0353, are introduced as follows.

•   High Water Productivity

Low membrane resistance of the hollow fiber and the large membrane area, 7.8 m2 in the module, succeed in producing enough water quantity even under lower pressure operation.

•   Heat Durable

In order to apply hot water sterilization, the hollow fiber in the module is made of heat resistant plastic, Polyethersulfone, and all other module components are also selected from highly heat

resistant materials.

The module was tested and passed severe thermal stress trials in which rapid heating and cooling between 2°C and 98°C was repeated.

•   Excellent Chemical Resistance

Because the hollow fiber is made of an excellent plastic, Polyethersulfone, it is resistant to many chemicals in a wide pH range of 1-13. Furthermore the efficiency of the membrane can be easily

recovered by using a strong detergent.

•   Distinguished and Sharp Separation Characteristics

The hollow fiber membrane molecular weight cut-off is 30,000 Dalton. It can reject not only bacteria and fine particles but also completely reject endotoxins in feed water. Therefore pyrogen

free water can be confidently produced by MOPSEP® hollow fiber modules.

CARTRIDGE DESCRIPTION
Product: ISOCON HF-106-20-PF
Part Number: 0720214
Description: 5 Inch (D) x 43 Inch (L) Hollow Fiber Cartridge
Membrane: Polysulfone
Housing Shell/End Caps: Polysulfone
Fiber Support Netting: Polypropylene
Potting Material: Proprietary epoxy compound
Preservative: Glycerin

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

KOCH MAKE SPIRAPAK MEMBRANE

SPIRAPAK™ MODULE: 4033-HFM-183-LPP
Spiral Ultrafiltration Module for Cathodic Electrocoat Paint

PRODUCT DESCRIPTION KMS Part Number: 0700786 Membrane Chemistry: PVDF Membrane Type: HFM (positive charge) Membrane Area: 59 ft² (5.5 m²) Construction: Spiral wound element with integrated PVC housing Seal: EPDM Feed Spacer Thickness: 0.030” (0.77 mm)  

Additional Information:

• Item Code: 0700786
• Production Capacity: 5.5 M3/HR
• Delivery Time: 6-8 WEEK
• Packaging Details: WOODEN BOX

Being a leader in the industry, we are engaged in offering a qualitative range of UF Membrane to our clients.

Features:

• Fine finish
• Filter unwanted chemicals
• Easy to install

Ultra filtration Systems

RAPID ULTRA Most waters contain colloidal particles, organics and fine suspended solids resulting in high SDI (silt density index) which is harmful to downstream water treatment processes.

Ultrafiltration is the ideal cost-effective method for reduction of SDI and Colloidal silica. RAPID ULTRA comes in flow rates up to 200 m3/hrs as standard units.

• High retention rate for particles, germs, bacteria and viruses.
• Considerably smaller systems which use conventional flocculation and filtration.
• Modular design.
• Less work for the operating personnel due to fully automatic operation.
• Continuous Operation. & Low maintenance

 

 

 

 

Additional Information:

• Item Code: RAPIDULTRA
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Any as preferred and discussed
• Production Capacity: 5000 LPH - 100000 LPH
• Delivery Time: 8-10 WEEK
• Packaging Details: Wooden Box

Pressure tube is available of differnet make above price is just to fill if you want to buy please send us the detailed inquiry

RO membrane elements are available in various sizes, we specifically provide in 4 inches and 8 inches, from reputable manufacturers such as DOW, Hydranautics, and Toray.

DOW Membrane Models:

• BW Series:
  • BW30-440i
  • BW30-400/34i
  • BW30-400
  • BW30-365
  • BW30-400/34i-FR
  • BW30-400-FR
  • BW30-365-FR
• LE Series:
  • LE-440i
  • LE-440
  • XLE-440

Sea Water Membrane Models:

• SW30XLE-400i
• SW30HR LE-400i
• SW30HR LE-400
• SW30HR-380
• SW30HR-320

These membranes are designed to meet a variety of water treatment applications and ensure high efficiency and reliability in reverse osmosis processes.

Additional Information:

• Delivery Time: Immediate Dispatch